Congratulations and Thank You for purchasing the one and only
Billet Atomizer Racing Injectors!!!

We have fueled many world records and championships in the drag racing arena, salt flat racing, standing mile, and boat racing world wide.

Introduction

Enclosed is a summary of our Billet Atomizer Injectors Instructions, service recommendations and disclaimer information. Please contact our office for pricing.

The new Billet Atomizer coils were designed to increase the magnetic strength of the injector by 60%, resulting in huge improvements in the capacity, range, and opening time performance of the injectors.

Fuel Injector Specifications

 SIZE STATIC FLOW RATE  IMPEDANCE  RESISTANCE FUEL PRESSURE RATING NOZZLE STYLE SPRAY ANGLE
100 lb/hr 100 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
120 lb/hr 120 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
160 lb/hr 160 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
225 lb/hr 225 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
235 lb/hr 235 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
275 lb/hr 275 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
325 lb/hr 325 LOW @ 1.6 43.5 PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
500 lb/hr 500 LOW @ 1.6 90  PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern
550 lb/hr 550 LOW @ 1.6 90  PSI Atomizer Disc Large Fog with 45 degree Vapor Cone Pattern

WE CAN CUSTOM SIZE AND CALIBRATE YOUR INJECTORS TO OPTIMIZE YOUR DUTY CYCLE AND ENGINE PERFORMANCE FOR ALMOST ANY APPLICATION.  OUR CUSTOM SIZES RANGE FROM 60 LB/HR TO 550 LB/HR.  AN EXAMPLE IS A 205 LB/HR @ 65 PSI BASE FUEL PRESSURE TO ACHIEVE A 63% DUTY CYCLE.

Billet Atomizer injectors work with all racing fuels. Please review the Injector Instructions as you will need to exercise the proper maintenance. Maintenance includes flushing of the injectors to purge any oxidizing fuels from the injectors when not in use. Please call (256-652-7475) if you have questions.

Fuel Pressure

Billet Atomizer Racing Injectors SHOULD NOT EXCEED 90 PSI max base fuel pressure due to the fact it may cause engine damage.

BASE FUEL PRESSURE INFORMATION & EXAMPLES

As far as the 90PSI base pressure, this pressure is referring to the maximum base pressure before boost.

As long as you are utilizing a 1 to 1 ratio on fuel pressure vs. boost, you would be able to apply 50lbs of boost, resulting in the addition of 50 pounds fuel pressure.  This would yield 140 maximum total fuel pressure of 140PSI pressure, which is ok.

Example:

  • For injector sizes: 100lb/hr, 160lb/hr, 235lb/hr, 275lb/hr
    43.5PSI base fuel pressure + 50pounds of boost = 93.50 pounds of total fuel pressure at the injector.
  • For the 500lb/hr injectors
    90PSI base fuel pressure + 50 pounds of boost = 140 pounds of total fuel pressure at the injector.

CAUTION – Warning

Filter – CAUTION

It is Mandatory to use a 10 Micron filter with our injectors.  You must run a 10 micron filter between the injectors and the fuel pump, NOT between the fuel pump & fuel tank.

For methanol users:  Billet Atomizer Racing Injectors recommends the Moran Motorsports 10 Micron stainless steel methanol safe filter assembly.  Our own line of filters is being developed and will be available soon.

For gas users:  We recommend Weldon 10 Micron fuel filters.

Injector Cleaning & Maintenance

Before Using Injectors:  Thoroughly clean all fuel lines, fuel rails, & fittings.  Any debris left in these areas prior to use could cause damage to the injectors. For methanol users: We recommend Moran Motorsports Filter Assembly Kit to obtain optimum results. After Using Injectors: Billet Atomizer Racing Injectors work best when top lube is present in the methanol. After use, the injectors must be purged of methanol, and then lubricated. Failure to purge methanol from the injectors after use WILL damage the injectors.

Maintenance:  In addition to doing the maintenance procedures listed above, we recommend sending the injectors back once a year for a complete freshen and flow match.

Flow Testing

If you should decide to flow test your new Billet Atomizer Injectors, the only fluid you should use is NHeptane calibration fluid. DO NOT USE water! Using anything other than N Heptane fluid, gasoline, or methanol WILL damage your injectors.

Recommendations & Tolerances

FUEL PRESSURE

Billet Atomizer Racing Injectors: DO NOT EXCEED 90 PSI max BASE fuel pressure. HIGHER BASE PRESSUE MAY RESULT IN ENGINE DAMAGE.

ECU Requirements

For our injectors to run with your EFI system, they require dedicated drivers that are 4 amp peak & 1 amp hold, which is what the industry standard is for all aftermarket EFI systems. If you have any questions regarding your EFI system, please contact your manufacturer direct to ensure these requirements are met.

Limited Warranty & Information

Statement: The only warranties applying to this part(s) or service are those which may be offered by the manufacturer. The manufacturer hereby expressly claims a Limited Warranty for Billet Atomizer Racing Fuel Injectors for parts and labor, not including any and all shipping charges. Shipping costs to and/or from dealer for warranty is at the customer’s expense and not included in the warranty. When shipping, use care in packing – you must ship in the provided case at time of original purchase, ship it prepaid, and adequately insured.

Include a letter detailing the information, provide a daytime phone number where you can be reached, and email address, if available. This Limited Warranty only covers failures due to defects in materials or workmanship, and does not cover normal wear and tear or cosmetic damage. Failure to adhere to these instructions will void this warranty.      This Limited Warranty does not cover “acts of God”, owner abuse, misuse, neglect, mishandling, misapplication, alteration, faulty installation, maladjustments of consumer controls, improper maintenance, modification, malicious destruction, commercial use, or anything, for that matter, outside of a mechanical failure incurred with normal usage. This Limited Warranty is in effect until the product has been discontinued or at any time at the discretion of the Company. Any and all other warranties, either express or implied, including any implied warranties, merchantability or fitness for a particular purpose, and neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of this part(s) and/or service. Buyer shall not be entitled to recover from the selling dealer or manufacturer any consequential damages, damages to property, damages for loss of use, loss of time, loss of profits, loss of income, or any other incidental damages.

Manufacturer Disclaimer

The purchaser is solely responsible for determining the suitability of Billet Atomizer products. There is no warranty stated (other than above) or implied due to the unusual stresses placed on race cars and components and we have no control over how they are installed, maintained, and used. Due to hazards involved with racing, Billet Atomizer Racing Injectors accepts no liability for failures of racing components or accessories manufactured or sold by our distributors. Upon purchasing this product, customers accept all risks involved with racing and hazards thereof.                                                                                                              

Warning

Failure to follow these instructions and common sense when using Billet Atomizer Racing Injectors can cause damage to these injectors, and your engine. Billet Atomizer Racing Injectors is not liable for injury or damage to you and/or your engine/equipment. Failure to follow these instructions, including the use of the recommended filter, will void the warranty. Please see Limited Warranty & Disclaimer sections for more information.

Injector Service

Shipping costs to and/or from dealer is at the customer’s expense, regardless of reason for shipment. When shipping, use care in packing – you must ship in the provided case at time of original purchase, and ship it prepaid, and adequately insured. Include a letter detailing all information, and provide a daytime phone number/ email address where you can be contacted.

SHIP TO:

BILLET ATOMIZER RACING INJECTORS
8105 RICHMOND ROAD SUITE 405
TOANO, VA   23168

There will be a minimum charge of $150.00 for all evaluated injectors sent in for service. If customer decides not to have any work done, the injectors will return ship when the $150.00 evaluation fee is paid.